ShkYo30 Posted July 11, 2020 Share Posted July 11, 2020 (edited) Donuts & Cupcakes! What? This is the theme of my new 3D animation [V2] of dominoes falling down! The goal? Have fun and training my skills in 3D simulations under Houdini v18! Technical details : - Houdini 18 -> Modeling, textures of Cupcakes and Donuts, rigid body dynamics simulations, placement and cameras paths. - Blender 2.83.1 -> Textures, lights and rendering with Cycles, because Houdini's mantra is really too slow to calculate ... Now enjoy it and leave me likes and comments, it's always a pleasure !! Here : https://www.youtube.com/watch?v=0sFKkirxTbk Edited July 27, 2020 by ShkYo30 Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted July 27, 2020 Author Share Posted July 27, 2020 Hi everyone! That's the [V1] of my new video : SOFTBODY BALLS SIMULATION ! It's the FIRST VERSION, and this is a "stacking" video! And why? Hmmm... Why not! As usual, I think it's colorful, happy, fun and oddly satisfaying! ;-) This is another way to continue improving my skills of Houdini (from SideFX) with SoftBody Simulation, Procedural modeling and Dynamics... All objects modeling, camera paths and soft body dynamics had been made with Houdini v18 Calculating (and saving!) Balls Softbody simulation with Houdini was fast, only about 120 minutes with my AMD Ryzen 9 3900X... And for the texturing and renders, this time I used Mantra renderer directly from Houdini, many thanks to NVIDIA with their powerful Optix Denoiser which allow faster rendering with my new RTX2080Ti FE ! Only around 35 hours of rendering with my powerful PC (see below for the setup...) Anyway, have fun with this video and enjoy the stacking of hundreds of softbody balls !! https://www.youtube.com/watch?v=80rl4VX5x_w Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted August 25, 2020 Author Share Posted August 25, 2020 Hi everybody! Today, it's just a short mix of some Houdini tests : grains falling down, toys crashing on the floor, etc... Why this compilation? Hmmm... Why not! I continue to improve my skills of Houdini... All objects modeling, camera paths and soft body dynamics had been made with Houdini v18 For the texturing and renders, I used Mantra renderer directly from Houdini, with NVIDIA Optix Denoiser which allow faster rendering ! Only around 25 hours of rendering in FullHD with my PC ... Anyway, I made these videos with fun and I hope you have fun to watch them !! https://www.youtube.com/watch?v=Bi9RuB4KCFg Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted September 10, 2020 Author Share Posted September 10, 2020 We are the 10th of the month! My new #3d animation is online! On the menu: #softbody well shaken, with a shaker and not with a spoon , and a final... a must to see! All cooked with #houdini and served on a tray with #redshift, stay cool and see you soon! 2 Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted September 20, 2020 Author Share Posted September 20, 2020 It's the 20th of the month! Small tribute to Super Mario World into my last 3d animation for his 35th anniversary! To be seen: softbody tumbling down, with happy rebounds , and a new finale... not to be missed! All modeled and animated with Houdini and calculated (very quickly!) with Redshift, stay zen and see you next time for the 30th of the month! https://www.youtube.com/watch?v=cXk-BWAw3ww Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted September 30, 2020 Author Share Posted September 30, 2020 We're the 30th of the month! Think : after some hours of playing TETRIS there are lots of blocks... What would happen if they came in the real World ??? An absolute flooding of Tetris pieces ! My new 3d animation show you that... Enjoy ! https://www.youtube.com/watch?v=Qdi-3wVEFzc All objects modeling, camera paths, rigid body dynamics and simulation had been made with Houdini v18.0.499 Calculating simulation with Houdini was faster, only 45 minutes with my AMD Ryzen 9 3900X... For textures and renders, I used REDSHIFT 2.6 renderer, and NVIDIA Optix Denoiser to make faster renders To render all the 3200 frames, it took about 70 hours because of the 4 camera point of view... Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted October 10, 2020 Author Share Posted October 10, 2020 Today is October 10, the month of Halloween! A super cool theme for rolling and bouncing Pumpkins, Skulls and other Witch Hats! My new video uses Houdini's Vellum module to simulate very kind bouncing objects (softbody), just to enjoy your time! All objects modeling, soft body dynamics and simulation, camera paths, had been made with Houdini v18 from SideFX Simulation calculation time with Houdini was longer than the last animation, about 200 minutes with my AMD Ryzen 9 3900X... I used REDSHIFT v3 to render, and NVIDIA Optix Denoiser to speed up rendering process ! To render all the 2050 frames, it took only 8 hours this time because I'd simplified the textures... Well, it's here : https://www.youtube.com/watch?v=qRVGGYkkIzE 1 Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted October 20, 2020 Author Share Posted October 20, 2020 Hi everyone ! We're always in October, Halloween day approaching quickly... Today : TUMBLING OF PUMPKINS, SPIDERS, SKULLS And So on ! Stay till the end to don't lose the final scene ! Lots of Rigid Body Pumpkins, Spiders and Skulls which tumbling allong pipes to a large Cauldron with a dynamic music ! All objects modeling, rigid body simulations, camera paths, had been made with Houdini v18.0.597 Simulation calculation time with Houdini was long (too many interacting objects I think), about 240 minutes with my AMD Ryzen 9 3900X... And I used REDSHIFT v3.0.30 to render, and NVIDIA Optix Denoiser to speed up rendering process ! To render all the 3100 frames, it took about 30 hours this time... Have fun with this new video and enjoy these TUMBLING PUMPKINS AND SKULLS !!! https://www.youtube.com/watch?v=DpBUH0ALJA8 1 Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted October 30, 2020 Author Share Posted October 30, 2020 (edited) Hello everybody ! This is it, Halloween Week-End! To the menu: CRAZY FLYING SNEERING SKULLS WITH BOUNCING PUMPKINS AND A MYSTERIOUS CAULDRON! And don't quit before the final scene! In this one, there are many squishy Pumpkins and crazy flying Skulls with a mysterious Cauldron with a cool Hallloween music ! All objects modeling, objects animations, explosion, camera paths, have been made with Houdini v18.5.351 from SideFX The explosion simulation calculation time with Houdini was very fast about 15 minutes with my AMD Ryzen 9 3900X... As always, I used REDSHIFT v3.0.31 to render, and NVIDIA Optix Denoiser to speed up rendering process ! To render the 3350 frames, it took less than 10 hours this time... Have fun with this Halloween Video and enjoy these CRAZY SKULLS AND BOUNCING PUMPKINS!!! It's here : Edited October 30, 2020 by ShkYo30 Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted November 6, 2020 Author Share Posted November 6, 2020 Hello everyone, just a quick post to let you know that this week I launched the Facebook page for my Youtube channel, 3D Forever ! You'll see behind the scenes of the making of my videos with Houdini, with screenshots and some explanations for each... Thank you in advance to future visitors, and I hope subscribers! It's here : https://www.facebook.com/3d.forever.funny.videos Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted November 15, 2020 Author Share Posted November 15, 2020 Hi everyone ! Today, a Weird Race between Pac-Man and... Dominoes !! What's ? Yes, it's Strange but.. WHO WILL WIN ?? This is my first Race Style Video, I hope you like it ! It was really funny to create for me.. All objects modeling, objects animations, camera paths, have been made with Houdini v18.5.351 The Rigid Body simulation calculation time with Houdini was very (very) fast, less than 5 minutes with my AMD Ryzen 9 3900X... I used REDSHIFT v3.0.31 to render, and always the NVIDIA Optix Denoiser to speed up rendering process ! To render the 2281 frames, it took only about 12 hours this time... If you want to see more about my creation process, you can visit (and follow ) my dedicated Facebook page, where there are many screenshots and some explanations about the main steps of the making-of... https://www.facebook.com/3d.forever.funny.videos Have fun with this Weird and Crazy Race between the Legendary Pac-Man and Dominoes ! https://youtu.be/JkYGFjupQzA Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted November 30, 2020 Author Share Posted November 30, 2020 Christmas is coming ! What could be better than a fun little Party to relax a bit? This is precisely the subject of my new online video since today! Of course I modeled everything with Houdini v18.5.351, as well as the camera path and the simulation (about 80 minutes of calculations) of the dancing objects and the mechanisms that shake them. The textures and the 3D rendering are done directly with Redshift v3.0.31 in only 14h with my two cards (RTX2080Ti + GTX1080)... It's here : https://youtu.be/Ief5qWWuGQ8 Remember to visit my Facebook page dedicated to the behind the scenes of the creation of this video (as well as the others!) : https://www.facebook.com/3d.forever.funny.videos/posts/127873539126982 1 Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted December 15, 2020 Author Share Posted December 15, 2020 Christmas is almost here! Today I present you a Christmas Marble Race !! The Red ball versus the Green ! Who will win ? https://youtu.be/wr-rQ7PGaLA Everything has been modeled with Houdini v18.5.351, including the camera path and the simulation (70 minutes of calculations) of the balls course and the mechanisms they travel. The textures and the 3D rendering are created with Redshift v3.0.31 in about 15h with my two #Nvidia cards (RTX2080Ti + GTX1080) ... Visit my Facebook page dedicated to the making of this video (and the others! ): https://www.facebook.com/3d.forever.funny.videos/posts/137614704819532 Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted December 30, 2020 Author Share Posted December 30, 2020 The end of the year 2020 is here! I present to you my Happy New Year 2021 video !! With a Huge Fireworks to see ! It's here : https://youtu.be/6EBUvcT6rXE Everything was modeled with Houdini v18.5.408, including the camera path and the simulation (5 minutes of calculations), the particles calculation was done in real time. The textures and the 3D rendering are created with Redshift v3.0.34 in about 15h with my two Nvidia cards (RTX2080Ti + GTX1080) ... Visit my Facebook page dedicated to the making of this video (as well as the others! ): https://www.facebook.com/3d.forever.funny.videos/posts/149112147003121 Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted January 15, 2021 Author Share Posted January 15, 2021 Firstable : HAPPY NEW YEAR 2021 ! For the 1st video of the year 2021, I present you a Compilation of Infinite LOOPS ! Everything was modeled with Houdini v18.5.408 Textures and 3D rendering are created with Redshift v3.0.34 It's here : https://youtu.be/zgZa9JdJvy0 Visit my Facebook page dedicated to the making of these videos! : https://www.facebook.com/3d.forever.funny.videos 1 Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted January 30, 2021 Author Share Posted January 30, 2021 Hello everybody ! Okay, this video is a remake... I'm currently too busy to do more ! But I still wanted to release a new video for the 30th ! And it's not really the same video, the video editing is more dynamic, the objects are differents, the colors are more pastel, and especially the final scene is different too ! https://youtu.be/Qe4M-LK7qFs All objects modeling, animations, simulation, camera paths, have been made with Houdini v18.5.408 from SideFX The calculation time of the Soft Body simulation with Houdini took only about 45 minutes with my AMD Ryzen 9 3900X...This time I used the new REDSHIFT v3.0.35 to render, and also the NVIDIA Optix Denoiser to speed up rendering process ! To render the 7000 frames, with my new RTX3090 it took only 20 hours... If you want to see more about my creation process, you can visit (and follow ) my dedicated Facebook page, where there are many screenshots and some explanations about the main steps of the making-of... https://www.facebook.com/3d.forever.funny.videos Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted February 14, 2021 Author Share Posted February 14, 2021 Hi everyone ! Today just bunch of Cute Red and Chubby little Hearts which joyfully bouncing ! I'm always too busy to do more ! But it was necessary to make a new video for Valentine's Day ! All objects modeling, animations, simulation, camera paths, have been made with Houdini v18.5.408 The calculation time of the Soft Body simulation with Houdini took around 5 hours with my AMD Ryzen 9 3900X (yes there was lots of hearts...) As always I used the REDSHIFT v3.0.35 to render, and also the NVIDIA Optix Denoiser to speed up rendering process ! To render the 5000 frames, with my new RTX3090 it took around 30 hours... https://youtu.be/B2Ez41vKy8A If you want to see more about my creation process, you can visit (and follow ) my dedicated Facebook page, where there are many screenshots and some explanations about the main steps of the making-of... https://www.facebook.com/3d.forever.funny.videos 1 Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted February 28, 2021 Author Share Posted February 28, 2021 Hello everybody ! Today, it's a new Satisfying Video... Some Liquids animations in Slow Motion with a cool and nice music ! I think it's oddly satisfying to watch... I hope you like it anyway... Video Editing with Premiere Pro and it's old Fluids Simulations with FLIP Fluid in too many time... Renders times were so... long ! I don't remember exactly, but they took days of rendering with my old PC... It was before my new RTX (3090 + 2080Ti) cards, with "only" the GTX generation (1080 + 970) ! Don't forget to visit my "Behind The Scenes" page : https://www.facebook.com/3d.forever.funny.videos Have a lot of satifying with this new try... https://youtu.be/ZUI3IcLGZOY 2 Quote Link to comment Share on other sites More sharing options...
ShkYo30 Posted March 15, 2021 Author Share Posted March 15, 2021 Hi everybody ! This is my (totally! ) new Video : Thousand of Balls Flooding a Scifi Corridor ! With some parts in Slow Motion and a very cool (explosive...) end ! I chose a cool and nice music too ! The design style and colors choice are different than my usual choices... I hope you like it... Video Editing made with Premiere Pro and the Rigid Body Simulation has calculated with Houdini in not so long time, only 2 hours with my Ryzen 9 3900X... Render times weren't so long, around 30 hours for 3600 frames (there are 3 cameras). With my new RTX duo (3090 + 2080Ti) cards, "only" an average of 35s per frame ! Quote Link to comment Share on other sites More sharing options...
flcc Posted March 15, 2021 Share Posted March 15, 2021 (edited) It's fun, but without wanting to be harsh, the editing ruins your film a bit. Especially you should avoid the succession of shots with 180° orientation points of view. And slow motion is cool, but you shouldn't abuse it. Editing is a crucial part of making a movie. Edited March 15, 2021 by flcc 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.